What is a bi-folding speed gate, and does your Dallas facility need one? A bi-folding speed gate is an automated vehicle gate whose leaves fold in the middle as they open, so it clears a driveway in seconds while needing far less room than a swing gate and no run-back space like a slide gate. It is the right choice for busy commercial entrances on tight sites, where a slow gate causes vehicle backups or stands open long enough for tailgaters to slip through. For low-traffic entrances with plenty of room, a swing or cantilever slide gate is often the simpler fit.
78 Fence installs SecurFold bi-folding speed gates for commercial and industrial properties across Dallas-Fort Worth. This guide explains how bi-folding speed gates work, how they compare with other commercial gates, where they make sense, and what to plan before you install one.
How Does a Bi-Folding Speed Gate Work?
A bi-folding gate works much like a bifold closet door. Each side of the opening has two shorter panels joined by hinges. As the operator drives the gate open, the outer panel folds back against the inner panel, and the folded pair comes to rest beside the post. Closing runs the same motion in reverse.
Because each panel is short, it travels a short arc. That is why these gates open and close so much faster than a single long swing leaf or a slide gate that has to roll its full length along the fence line. Most commercial bi-folding gates are trackless, so there is no track across the driveway to collect debris, crack, or get damaged by trucks.
- Fast cycle times: TYMETAL, the maker of SecurFold, lists opening and closing speeds of 7 to 8 seconds and clear openings up to 30 feet
- Small footprint: the folded panels sit at the posts instead of sweeping a wide arc or needing room down the fence line
- Automation built in: the gate is designed to run on an operator tied to your access control system
- Security panels: heavy-duty steel or aluminum frames with ornamental, chain link, or solid panel options
Why Do Commercial Properties Choose Speed Gates?
For most businesses, the case for a speed gate comes down to two problems that slow gates create.
Do slow gates really cause security problems?
Yes. Every second a gate stands open after an authorized vehicle passes is a chance for another vehicle or a person on foot to follow it in. A standard swing or slide gate on a wide opening can take long enough to close that tailgating becomes routine. A gate that closes in seconds shrinks that window, which helps your access control actually control access.
How do speed gates help with traffic flow?
At a busy truck yard, distribution center, or employee lot, a slow gate turns into a queue. Vehicles stack up at the keypad or card reader, and on a Dallas frontage road that line can spill into the street. A faster gate moves each vehicle through sooner, so the entrance keeps up with shift changes and delivery waves.
Bi-Folding Speed Gates vs. Other Commercial Gates: Which Is Best?
No single gate is right for every entrance. The best choice depends on the space around the opening, how much traffic it carries, and the level of security you need. Here is how the most common commercial gate types compare:
| Gate type | How it opens | Space it needs | Relative speed | Best fit |
|---|---|---|---|---|
| Bi-folding speed gate | Panels fold in half and swing to the posts | Little room at the sides and about half the arc of a swing gate | Fastest | High-traffic, high-security entrances on tight sites |
| Cantilever slide gate | One panel rolls along the fence line on rollers, with no track in the drive | Run-back space along the fence of roughly the opening width plus a counterbalance tail | Moderate, slower as openings get wider | Wide openings with room along the fence line |
| Heavy-duty swing gate | One or two leaves swing on hinges | A clear, fairly level arc as deep as each leaf is wide | Slower as leaves get longer | Lower-traffic entrances with open, level ground |
| Vertical pivot gate | The gate arm pivots upward from one end | Overhead clearance, almost no ground space | Fast | Tight sites and rapid-cycle, high-security entrances |
| Vertical lift gate | The gate lifts straight up between towers | Overhead clearance, no side space | Moderate | Sites with no horizontal room on either side |
If your site has room down the fence line and moderate traffic, commercial cantilever slide gates are a proven, trackless option. If space is extremely tight in every direction, vertical pivot gates in Dallas are worth comparing. When you need both speed and a compact footprint at a busy entrance, a bi-folding speed gate is usually the strongest fit.
Where Are Bi-Folding Speed Gates Used?
Bi-folding speed gates show up wherever a facility needs fast, controlled vehicle access and cannot spare much room around the entrance. Common applications include:
- Industrial and manufacturing facilities: warehouses, factories, and distribution centers with steady truck traffic
- Airports and transportation hubs: controlled vehicle entry points that need high security
- Government and military sites: restricted facilities that cannot leave an opening standing
- Corporate campuses: employee entrances that handle heavy shift-change traffic
- Parking garages and commercial lots: entrances where traffic flow and security both matter
- Energy and utility sites: substations, power plants, and water treatment facilities
- Gated communities and HOAs: busy resident entrances where speed reduces tailgating
If you run a truck yard, see our guide on choosing the right gate for a trucking facility. For a broader look at site security, read about commercial gates and fences for warehouses and distribution facilities.
What Access Control Works With a Bi-Folding Speed Gate?
A speed gate is only as useful as the system that tells it when to open. SecurFold gates are compatible with the same access control tools 78 Fence installs on other commercial gates, so you can match the setup to how your site runs:
| Access method | How it works | Good for |
|---|---|---|
| Keypad | Drivers enter a code at a pedestal | Contractors, vendors, and small teams |
| RFID or card reader | Badges, cards, or tags are read at the gate | Employee entrances and tracking who enters |
| Intercom or telephone entry | Visitors call a guard or office, who opens the gate | Visitor and delivery check-in |
| Remote access | Authorized staff open the gate from a remote or app | Managers and fleet vehicles |
| Vehicle detection loops | Loops in the pavement sense vehicles to open on exit and hold the gate open while a vehicle is in the path | Free exit and safety at every gate |
Most sites combine several of these. For example, card readers for employees, an intercom for visitors, and direct burial vehicle detection loops for free exit.
Are Bi-Folding Speed Gates Safe?
They are when they are designed and installed correctly. A gate that moves quickly must also stop reliably, so entrapment protection matters even more on a speed gate than on a slow one. SecurFold gates are equipped with integrated safety devices such as motion detectors, safety edges, and obstruction sensors, and an automated gate operator should meet UL 325. Photo eyes, edge sensors, and loops all need to be placed for the specific gate and tested after installation.
78 Fence is certified in gate automation design and automated gate operator installation, and we follow the safety standards that many installers skip. Learn more about automatic gate safety.
Is a bi-folding speed gate crash rated?
Not automatically. A standard speed gate is an access control gate, not an anti-ram barrier. If your site must stop a vehicle attack, pair the gate with crash-rated commercial bollards or a vehicle barrier designed for that purpose.
What Should You Plan Before Installing a Speed Gate in Dallas?
A good speed gate project starts with a site walk. These are the details we look at before recommending a gate:
- Opening width and height: the clear width your largest vehicles need, and how tall the gate should be for your security level
- Space around the posts: where the folded panels will rest and what is nearby, such as guard shacks, curbs, or landscaping
- Traffic volume and peaks: how many vehicles use the entrance each day and when the rush happens
- Access control: who needs in, how they will be credentialed, and how visitors and deliveries are handled
- Power and wiring: where power comes from and how controls, loops, and readers will be run
- Foundations and soil: Dallas clay soil shifts with moisture, so posts and footings must be built for it
- Underground utilities: lines must be located through Texas One Call before any digging
- Matching your fence: panel style and finish that tie into the perimeter fence you have or plan to install
Once a speed gate is in, keep it on a regular service schedule. Fast gates cycle many times a day, and small adjustments keep them running smoothly. If an existing gate is giving you trouble, our team handles commercial gate repair in Dallas.
Frequently Asked Questions About Bi-Folding Speed Gates
What is a bi-folding speed gate?
A bi-folding speed gate is an automated vehicle gate with panels hinged in pairs, so each side folds in half as it opens. Because the panels are short, the gate opens and closes in seconds and needs little space around the entrance. It is used at busy commercial and industrial entrances where speed and security both matter.
How fast does a bi-folding speed gate open?
Much faster than a typical swing or slide gate of the same width. TYMETAL, the manufacturer of SecurFold gates, lists opening and closing speeds of 7 to 8 seconds depending on the model. Actual speed depends on the gate size, the operator, and how the safety devices are set.
Is a bi-folding gate better than a cantilever slide gate?
It is better for busy entrances on tight sites, because it opens faster and needs no run-back space along the fence. A cantilever slide gate is often the better value where there is room down the fence line and traffic is moderate. The right answer depends on your site layout and traffic.
How much space does a bi-folding gate need?
Very little to the sides, because the folded panels rest at the posts. In front of or behind the opening, it needs roughly half the swing area of a standard swing gate of the same width. That makes it a strong option where a slide gate has nowhere to run back.
Can a bi-folding speed gate work with my access control system?
Yes. SecurFold bi-folding speed gates are compatible with keypads, card readers, RFID, intercoms, and remote access systems. 78 Fence can integrate the gate with your existing access control or recommend a new setup.
Does 78 Fence install bi-folding speed gates in Dallas-Fort Worth?
Yes. 78 Fence installs SecurFold bi-folding speed gates for commercial and industrial properties across Dallas-Fort Worth. We handle design, installation, automation, and ongoing maintenance and support.
Bi-Folding Speed Gate Installation in Dallas-Fort Worth
Since 1978, 78 Fence has built fences and gates for Dallas-Fort Worth businesses, with gate automation experience going back to 1989. Whether you need a speed gate for a busy truck entrance, a secure employee lot, or a facility with no room for a slide gate, we will assess your site and recommend a gate, operator, and access control setup that fits how your property runs. See all of our automated security gates.
Ready to speed up your entrance? Call 78 Fence at 214-351-0212, email robert@78fence.com, or contact us online to talk about a bi-folding speed gate for your commercial property.